Showing posts with label Timber Frame Open Homes. Show all posts
Showing posts with label Timber Frame Open Homes. Show all posts

Wednesday, May 16, 2012

Timber Frame Open Homes in North Carolina, New Hampshire, and New York

There are several Timberpeg Open Homes this Sunday, May 20th. Below are some pictures and details on the homes available to visit.

North Carolina

The two timber frame homes featured below are both located in Boone, North Carolina and are hosted by Timberpeg Independent Representative, Doug McGuire of Mountaineer Timberpeg.

Timberpeg Timber Frame Home Located in Boone, NC
The first home (pictured above) is custom designed and features a beautiful Douglas fir timber frame. The home is approximately 3,600 square feet and has 2 stories, 3 bedrooms, and 3 and a half bathrooms. The first floor includes a large master bedroom suite with a private office, large walk-in closet, fireplace and custom shower. A cathedral great room is open to the kitchen and dining room. The second level includes a bridge that connects two bedrooms on each wing and overlooks the great room. A cozy library is also located on the second floor.  There is also a conventionally framed "bonus room" located over the garage. Let us know you would like to visit this home or view more photos and details here.

Timberpeg Timber Frame Home Located in Boone, NC
The second home located in Boone that is available to see (pictured above) is a custom designed arts & craft / Adirondack style home.  The home is 4,300 square feet with 2 stories, 4 bedrooms and 3-1/2 bathrooms.  The home is framed with Douglas fir and the exterior is beautifully finished with a mixture of cedar shingles, wood siding, stone and stucco.  This home also features an ICF, Polysteel, lower level system, Passive Home design and was built under the Healthy Built Home guidelines. Let us know you would like to visit this home or view more photos and details here.

Timberpeg Timber Frame Home in Black Mountain, North Carolina

Timberpeg Independent Representative, Mountain Architects would like to invite you to see the above timber frame home located in Black Mountain, North Carolina. This home is a mountain retreat, custom designed by Architect Kenneth J. Wertheim, AIA.  This small 1,350 square foot, pine timber framed cabin retreat incorporates many green building products. The home features 2 bedrooms and lots of outdoor living space over looking dramatic mountain scenery. The home is located in a gated community and RSVP is required. Let us know you would like to visit this home or view more details here.

New Hampshire

Sutton, New Hampshire Timberpeg Timber Frame Home
The above home is custom designed and located in Sutton, NH. This home is considered a "hybrid timber frame," meaning part of the home is built using conventional or stick frame construction. In this particular home a spectacular Douglas fir timber frame is featured in the entry, kitchen, great room, dining area, the master suite entry, plus two second floor bedrooms and bathroom. The remainder of the home, including the attached oversized garage, features conventional construction. The timber frame portion of the house was enclosed with structural insulated panels and the roof was insulated using Timberpeg's energy efficient wrap & strap system. The walls and some ceilings were finished in skim coat plaster with tongue and groove spruce ceiling decks in the timber frame areas and in other locations of the home. The main living area is approximately 3,450 square feet plus a walkout basement that is partly finished with an additional bedroom, bathroom and family/recreation area. The home is still under construction but is entirely enclosed. Timberpeg Independent Representative, Old Hampshire Designs would like to invite you to Contact us for more details on this timber frame open home.

New York

Timberpeg Timber Frame Home Located in Stratford, New York
The home pictured above is located in Stratford, NY and is being built by Timberpeg Independent Representative, Marshall Scott. The home will be under construction during the time of the open home but it will be fully enclosed with mechanicals being installed. This home is a custom designed, traditional style home with 1,900 square feet, 2 stories, 2 bedrooms and 3 bathrooms. The home features an eastern white pine timber frame and has has an open kitchen, dining and great room. The master suite is located on the first floor and a second bedroom is located on the second floor as well as a large balcony/loft overlooking the great room. Additional features include a covered porch and a conventionally built mudroom/laundry. Let us know you would like to visit this home or view more details here.

And last, but certainly not least, Timberpeg Independent Representative, John Shafer of Tree House Post & Beam will be hosting an open home located in Wevertown, NY. We hope to have photos of this home soon. You can view a rendering and more details about this home here or let us know you would like to visit this home.

To view the listings of all the Timberpeg homes available to see this spring, visit the Timberpeg Spring Home Tours page. Or you can call us directly at 800-636-2424 or email at info@timberpeg.com.

Monday, April 16, 2012

Visit Four Timber Frame Homes in Grand County, Colorado

Timberpeg Independent Representative, Les Watkins of LD Watkins Construction Services, Inc., would like to invite you to visit four Timberpeg homes in Grand County, Colorado this May. Click on one of the pictures below to let us know you would like to visit or contact Les directly at (970) 887-3044/les.watkins@ldwatkins.com to schedule a time to visit.

Timber Frame Home in Grand Lake, CO
The first home (above) is in Grand Lake and is a custom designed "western style" home that features a spruce timber frame. The home is 3,200 square feet with 3 stories, 3 bedrooms and 3 bathrooms. The interior is finished with pine tongue and groove. There are beautiful views of Shadow Mountain Resort and the home has over 5 different custom doors, a river rock fireplace and has "southwest accents." A Douglas fir Timberpeg porch was also added on to the home.

Timber Frame Home in Tabernash, CO

The second home (above) is located in Tabernash and is a custom designed, 3,800 square foot timber frame home. The post and beam home has 3 stories, 3 bedrooms and 4 bathrooms and features a beautiful eastern white pine timber frame. The interior is finished with pine tongue and groove.The home also has custom shelving and built-ins around the fireplace. This floor plan is perfect for mountain living with an excellent use of space that shows the timber frame beautifully.  

Timber Frame Home in Fraser, CO
There are two homes available to see in Fraser, Colorado. The one shown in the image above is a custom designed home with 3,200 square feet, 3 stories, 4 bedrooms and 4 bathrooms. The home features an eastern white pine timber frame and the interior is finished with pine tongue and groove. The timber frame is beautifully finished in a traditional whitewash. The floor plan is very comfortable for mountain living. 

Timber Frame Home in Fraser, CO
The other timber frame home located in Fraser (above) is 4,000 square feet with 3 stories, 3 bedrooms and 3 bathrooms. The home features a spruce timber frame and the interior is finished with pine tongue and groove. This home has an excellent floor plan which was based on one of Timberpeg's classic and most popular homes, the Tahoe. The home has a beautiful view of the continental divide, a dynamic great room and entry with window wall.

To let us know you would like to schedule a visit, click on one of the pictures in this post to fill out a registration form or contact Les directly at (970) 887-3044/les.watkins@ldwatkins.com to schedule a time to visit.

Friday, April 6, 2012

Visit Two Timber Frame Homes in Nebraska

Are you ready to start seriously thinking about building your timber frame home and think you might be near Ashland, Nebraska in the next month or so? If so, Timberpeg Independent Representative and Architect, Kurtis Suhr, would be  happy to schedule a time to meet with you to visit two beautiful Timberpeg homes in this area. Let us know you would like to visit one of these homes or call Kurtis directly at (402) 580-2312 to schedule a time to visit.



The first home (above) is a custom designed, hybrid timberframe featuring a lovely Douglas fir timber frame in the great room, kitchen and loft, with the balance of the home conventionally built.  The structure was enclosed with SIP’s panels, and the house features a main level master suite, second floor office/loft, and guest space in the fully finished basement. To view more pictures of the interior of the home, read an article featured in Omaha Magazine. The article starts on "spread" 68/69 (which is also page H28).


The second home (above) is a custom designed lakeside home that was originally based on the Timberpeg Lassen/Quechee floor plans and modified to include a three story octagon to capture the panoramic lake view.  With 5,450 square feet, the home has 2 stories, 4 bedrooms and 5 and 1 half bathrooms.  The home has an open floor plan on the main level. The kitchen, formal dining room, screened-in porch and covered deck surround the two story vaulted great room with a stone fireplace, which is overlooked by the second floor loft/study. The master bedroom suite with private deck is located on the main floor and the second floor has two bedrooms and two bathrooms with vaulted ceilings while the walk-out basement houses the office, exercise room, media room, recreation room and a bath. The fourth bedroom is placed in the bonus space above the garage. This home also includes 2 covered decks, front entry porch, walk-out basement and attached garage.   

Again, you can either fill out the form at the following link to let us know you would like to visit one of these homes or call Kurtis directly at (402) 580-2312 to schedule a time to visit. If you would like to find another Timberpeg timber frame open home, visit the Timberpeg Spring Home Tours page.

Wednesday, March 28, 2012

Tour a Timber Frame Home For Sale

This Saturday,  March 31 from 11:00a - 4:00p Timberpeg Independent Representative, Jerry Hollis of Southern Post & Beam will open up his own timber frame home in Jackson's Gap, Alabama for all to visit. Located on beautiful Lake Martin, this Timberpeg timber frame is also for sale.

Front exterior of home

Back Exterior View From the Lake

The home has 4 bedrooms and 4 and half bathrooms. Views of the lake can be seen from every room. The main level of the home has an open kitchen/dining/sun-room. The laundry is also located on the main level.
Open Kitchen/Dining/Sunroom
The main level also includes a more formal living room with vaulted ceiling and a beautiful fireplace.
Formal Living Room with Views to Lake

The second level includes a large bedroom, full bathroom and a balcony, which could function as an office or cozy library, overlooking the vaulted room below.  The lower level includes a second master bedroom suite with a large walk-in closet and also has office, den, media room, screened porch and deck.

View from Loft Down to Dining Room and Sun-room

A timber framed carport with covered boardwalk to the entry of the home is another unique feature of this Timberpeg.

Timber Framed Carport with Queen Post Truss
If you would like to see more about this event visit: timberpeg.com/news/openHomes#Alabama or let us know you'd like to visit this home by filling out the form here and someone will be in touch with you shortly. You can also contact the host, Timberpeg Independent Representative, Jerry Hollis, directly at (256) 825-2572 or via email at tghollis@charter.net.

Thursday, October 14, 2010

Mariposa, California Timberpeg Home to Reach Net-Zero

This TIMBERPEG home, located in Jerseydale (Mariposa), California is extremely energy efficient and, combined with the 7 kW solar array north of the house, is well on its way to yielding a net zero energy house.  Or put more simply, no bills for propane or electricity to heat, cool or run the house.

You can visit this this timber frame home THIS Sunday, October 17th from 10:00am-4:00pm. There will also be a free design seminar at noon.
Click Here for More Information on the Home Tour and Photos.

Read more about the energy efficiency of this home below (written by the homeowners):

First, the house was designed for this specific property to maximize not only the view of the ponds on the property and surrounding ridges, but also for energy efficiency though use of materials, orientation and placement on the property.   The timber frame house has an outer envelope of Structural Insulated Panels (“SIPs”) that produce a very well insulated and airtight structure.  Double pane energy efficient windows have been installed and their solar gain characteristics were evaluated and chosen to minimize solar heating on the south and west side of the house during the summer.  A passive solar heated garden room is located on the southern corner of the house with window heights and roof overhangs appropriate to maximize passive solar heating in the winter and minimize solar gain during the summer.

Second, the house is heated and cooled via a geothermal heat pump that uses a 3-acre pond on the property as the heat source (winter) or heat sink (summer).  Measured performance last winter showed that for every 1 kW of electricity used, 6 kW of heat was extracted from the pond and distributed around the house either via radiant floor heating (preferred) or via forced air.   During the summer, heat is pumped from the house into the pond and the cooled air is circulated around the house via forced air ducts.  The house is divided into various zones for heating and cooling and temperatures are controlled using 13 thermostats.  Considerable federal tax credits (30% uncapped) are offered for installation of geothermal heat pumps, as the federal government recognizes geothermal as the most efficient way of heating and cooling a house.

While an airtight house is very good from a heating and cooling efficiency standpoint, air quality can suffer if outside and inside air are not exchanged on a regular basis.  This is the job of our Energy Recovery Ventilation (“ERV”) system that allows exchange of outside and inside air while using a heat (and moisture) exchanger to recover most of the energy used to heat or cool the inside air. 

Third, we have installed energy efficient appliances and lighting, including extensive use of LED lighting fixtures and bulbs (there are no inefficient incandescent light bulbs in the house).  Our cook top is an induction cook top manufactured by Miele.  Not only is an induction cook top the most energy efficient way of cooking, our decision to purchase it eliminated any need for propane in the house.  (We do have propane for our back-up generator.)  All the other kitchen appliances are also produced by Miele, which markets high end products that are relatively energy efficient.

Forth, electricity is generated on-site by a 7 kW solar array.   The house is “all electric” in that there is no other source of heat such as propane or natural gas.  Thus generation of electricity on-site is the other half of the energy efficiency/zero energy bills equation.  The house is “on-grid” and so, during the winter, we do use more electricity than we generate.  Our biggest electricity bill once we had our solar panels and PG&E net metering installed was $165 for February.  We were pretty much breaking even by April and May and generating a $100 plus credit per month during the late spring summer months (June and July) for electricity fed back into the grid. Thus, achieving net zero energy bills for the year seems realistic.

Fifth, the climate at our elevation (3800 feet) means that, while we have some snow in the winter, the summers are relatively cool.  This, combined with the design of the house, minimizes the need for air conditioning.  Thus we are using electricity for heat during the winter months when electricity is less expensive (e.g. <9 cents a kW hour) and putting electricity back into the grid during the summer afternoons when electricity is worth at least 31 cents a kW hour.  

These five factors combine to result in a house that is not only very comfortable, but also very energy efficient and capable of putting energy back into the grid when others need it most.

Friday, May 28, 2010

Timberpeg Timber Frame Independent Rep, Don Walkins on The Morning Blend

Once again, Timberpeg Independent Rep, Don Wolkins of Raven's Nest & Co., Inc. located in Omaha, Nebraska was featured on The Morning Blend. He discussed timber frame homes and working with Timberpeg to build a home in the Raven's Nest community. If you are looking for land or are planning to build in Nebraska, or even if you are just interested in learning more about Timberpeg, take a look at the segment. You'll have a chance to see photos of some of Timberpeg's most beautiful homes as well as pictures of Raven's Nest development located in Nebraska.

Friday, April 23, 2010

Timber Frame Open Homes

Timberpeg's National Spring Open Home Event Begin's this Sunday!
Check out our website to find one near you
.
The timber frame open homes are located all over the country and will be shown this Sunday, April 25th or next Sunday, May 2nd (and some will be shown both Sundays!).

Our website has photos of most of the timber frame homes and many of the homes even have a gallery of the construction process linked.